Penetrating Primer

From: $69.00

    • 69 $each

    Quantity Discounts Available:

    • 189 $each
    • 179 $each
    • 169 $each

• Waterbased technology
• Single coat application
• Acts as a clear penetrating sealer for topcoats
• Acts as bonding agent for topcoats
• Cost effective super concentrate saving $
• Non-solvent benefiting internal/external applications.
• Pre-seals porous concrete surfaces
• Excellent primer barrier coat
• Prevents sink back scenarios
• Prevents dry patches when topcoating.
• Fast dry times (see below)
• For plain, coloured, decorative and exposed aggregate.
• No odour with extremely low VOC.
• Non-flammable.
• Food Safe
• Non Hazardous (Worksafe Aust, ADG Code).

Application
Broom, Roller or sprayer
Coats
Single Coat
Coverage
10-15 sqm / L per coat on porous surfaces (will vary according to application/surface)
15 – 20 sqm / L per coat on less porous surfaces
Dry Time
Dust Free: 5 mins
Touch Dry: 10 mins
Top Coat Recoatable: 2 hours (water based)
Wash Up
Clean-up on completion with water only. No solvents
Recommended Uses
Cost effective penetrating primer to hold up topcoats.
NOT Recommended
Non-porous surfaces including previously painted, highly polished or flamed substrates or have been previously treated with a highly built penetrating sealer.

Water Based
Non-Flammable
Odourless
No Toxic Fumes
Super Concentrate – Saving $

⇒First Read General Preparation Guide

· Grind/sand off previous old coatings, polish or wax residues
· Uncoated surfaces at the very least must be acid etched.
· Surface must be dry, clean and free from any loose particles.
· Application via 10-12mm roller, soft broom or sprayed.
1. Dilute 1 part primer with 5 parts water and stir. Depending on porosity of substrate product may be diluted up to 9 parts water.
2. Apply by spreading over the floor area using slightly overlapping strokes.
3. Do not allow primer to pool on surface.
4. Coverage at a minimum should be 10 sqm to 20 sqm per litre.