Moisture barrier

Forum Home Forums General Discussion Moisture barrier

This topic contains 1 reply, has 2 voices, and was last updated by  Tex Rowe 4 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1265 Reply

    Peter

    Do you have a moisture barrier product?
    If so,
    1) is it ok to use this product before your Coloured Paint Sealer product?
    2) Do I need to use you’re cleaner(mold etc) as well as an acid wash preparation?
    3)Do you have an acid wash prepartion product?

    #1278 Reply

    Tex Rowe
    Keymaster

    Hi Peter,

    Do you have a moisture barrier product?

    Please see:
    Water Based Epoxy
    https://cswcoatings.com.au/product/water-based-epoxy/

    1) is it ok to use this product before your Coloured Paint Sealer product?

    yes, please see Preparation Guide as painting over an existing coating would apply.
    https://cswcoatings.com.au/preparation/

    2) Do I need to use you’re cleaner(mold etc) as well as an acid wash preparation?

    A cleaner is for cleaning purposes only whereas an acid is for etching purposes only. Depending on dirt/stains etc an acid is not effective in removing this, so generally 2 products are utilised.

    3)Do you have an acid wash preparation product?

    No, this is generally a hydrochloric acid which can be purchased from most hardware stores.

    Tex Rowe
    CSW Coatings Australia
    CSW Coatings USA

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Moisture barrier

This board is for pre-sales questions. Do not post support requests for purchased products as per Board Rules and Agreement .

Your information: