Laying tiles over tiles

Forum Home Forums Tile Sealer Laying tiles over tiles

This topic contains 3 replies, has 2 voices, and was last updated by  Tex Rowe 2 months, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #1283 Reply

    Lyn

    I want to lay tiles over tiles and to have a waterproof adhesive and waterproof grout that will stop any mould growth.

    I have watched online videos using 100 solids Epoxy Sanded Grout mixes but have not found a source for these products.

    Please advise.

    #1293 Reply

    Tex Rowe
    Keymaster

    Hi Lyn,
    we only supply 100% Solids Epoxy in 10L Kits
    https://cswcoatings.com.au/product/100-solids-epoxy/
    100% Solids can be mixed with silica sand if needed though unfortunately have not used strictly in a grouting situation so hopefully someone else can weigh in here?

    Tex Rowe
    CSW Coatings Australia
    CSW Coatings USA

    #1351 Reply

    Steve burke

    Hi. I Have 55sqm of internal tiles and would like a solid white epoxy look, without a fleck finish. What’s my best choice, and can this be done DIY? I’m fairly handy and have tiled and concreted before. Thanks.

    #1356 Reply

    Tex Rowe
    Keymaster

    Hi Steve,

    Hi. I Have 55sqm of internal tiles and would like a solid white epoxy look, without a fleck finish. What’s my best choice, and can this be done DIY? I’m fairly handy and have tiled and concreted before. Thanks.

    This will depend…if porcelain/ceramic fully vitrified tiles then these are not coatable as adhesion becomes an issue. Best to run through the Pre-Application Testing found here:
    https://cswcoatings.com.au/preparation/
    to determine any coatings compatibility.
    Any of the 2 Packs found here:
    https://cswcoatings.com.au/product-category/concrete/2-pack-epoxies/
    are available in white. All the 2 packs are user friendly and easy to apply with the Water Based Epoxy:
    https://cswcoatings.com.au/product/water-based-epoxy/
    being the most popular choice among DIY’s.

    Tex Rowe
    CSW Coatings Australia
    CSW Coatings USA

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Laying tiles over tiles

This board is for pre-sales questions. Do not post support requests for purchased products as per Board Rules and Agreement .

Your information: