Concrete Clear Finish

Forum Home Forums Concrete Sealer Concrete Clear Finish

This topic contains 5 replies, has 2 voices, and was last updated by  Tex Rowe 6 months, 3 weeks ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #1432 Reply

    Paul Wynne

    Hi Tex, what is the best clear finish product for a lightly ground concrete floor in a games room. Is it possible to get a matte finish so that its not to slippery if it get wet. Looking for a similar effect as you see in shopping centres.

    #1436 Reply

    Tex Rowe
    Keymaster

    Hi Paul,

    what is the best clear finish product for a lightly ground concrete floor in a games room

    “Best” means different things to different applicators though for such an environment applicators typically opt for:
    100% Solids Epoxy available in clear and technically supplied as high gloss:
    https://cswcoatings.com.au/product/100-solids-epoxy/
    or
    2 Pack Urethane available in clear and technically supplied as gloss:
    https://cswcoatings.com.au/product/2-pack-urethane/

    Is it possible to get a matte finish so that its not to slippery if it get wet.

    There are many factors that contribute to the slip factor (coefficient of friction) that include but are not limited to porosity of substrate and spread rate.
    For more info on the Finish of a product please see:
    https://cswcoatings.com.au/finish/
    As an option Extra Grip Additive:
    https://cswcoatings.com.au/product/extra-grip-additive/
    is also available for most topical coatings.

    Looking for a similar effect as you see in shopping centres.

    Shopping centre systems may include above mentioned systems though may also simply use polish products coupled with mechanical polish maintenance systems (buffing).

    Tex Rowe
    CSW Coatings Australia
    CSW Coatings USA

    #1439 Reply

    Paul Wynne

    Tex, I have 40sqm to do. Do you sell smaller containers of the 2 pack urathane?

    #1444 Reply

    Tex Rowe
    Keymaster

    Hi Paul,

    Tex, I have 40sqm to do. Do you sell smaller containers of the 2 pack urathane?

    4 Litre Kits can be found here:
    https://cswcoatings.com.au/product/concrete-benchtop-2-pack-urethane/
    Hope this helps.

    Tex Rowe
    CSW Coatings Australia
    CSW Coatings USA

    #1441 Reply

    Paul Wynne

    Tex, I have 40sqm to do. What size can will I need in Urathane or Expoxy?

    #1448 Reply

    Tex Rowe
    Keymaster

    Hi Paul,

    Tex, I have 40sqm to do. What size can will I need in Urathane or Expoxy?

    re: 2 Pack Urethane:
    https://cswcoatings.com.au/product/2-pack-urethane/
    for 2 coats at recommended spread rates plus loses, 1 x 20L kit will be sufficient.
    OR
    re: Water Based Epoxy
    https://cswcoatings.com.au/product/water-based-epoxy/
    for 2 coats at recommended spread rates plus loses, 2 x 10L kits will be sufficient.

    Tex Rowe
    CSW Coatings Australia
    CSW Coatings USA

Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: Concrete Clear Finish

This board is for pre-sales questions. Do not post support requests for purchased products as per Board Rules and Agreement .

Your information: